US Army Materiel Command AMCP 706-117 — Environmental Series, Part Three: Induced Environmental Factors

Downloaded from https://www.everyspec.com AMOP 70-117 the same procedure, with the sealing of sensitive items radiation, nuclear radiation, or vibration exceeds that from sand and dust being most effective. In other cases available on sand and dust, acceleration, or acoustics it is necessary to provide more resistant surface coat. by orders of magnitude. However, a very brief presen- ings or operationally to avoid sand and dust exposure.

tation is provided on nuclear radiation because of its The design of shock mounts, cushioning materials, and classified nature and because of the extensive treatment packaging techniques allows the protection of many given to it in other Engineering Design Handbooks-- materiel items from.vibration, shock, or acceleration. specifically, AMCP 706-235 and AMCP 706-335 However, since it is impossible to avoid completely through -338. such forc^s, the mechanical engineer has learned how It is only in the laboratory that the effect of a single to compensate or design for such forces. Personnel, on environmental factor can be ascertained.

In any real whom the acoustical factor has the moat effect, can be situation a large number of environmental factors act protected from such effects with acoustical insulation, in concurrence and often in synergism. However, for ear protectors, or similar devices. Methods to protect the induced environmental factors, the effects of any materiel from the effects of acoustics are very similar one or all of them can usually be reduced to a level to those employed to protect against vibration. Electro. where they have no detectible effect. Likewise, a num- magnetic and nuclear radiation protection of materiel ber of the natural environmental factors may be con.

is dependent primarily upon shielding and hardening trolled to where their effect is minimal. Thus, effects of technology. In the first case the design engineer at- terrain, solar radiation, rain, solid precipitation, fog, tempts to prevent such radiation from entering into wind,, salt, ozone, macrobiological organisms, and mi- sensitive regions of the design, while in the second in- crobiological organisms may be eliminated in a con- stance the engineer attempts to provide designs that trolled environment. Flowever, the effects of tempera- will not be affected by such radiation. ture and humidity are always present and constitute a All information on the induced environmental fac.

controllable factor. tors is not included in this handbook. A prominent In any field exercise involving materiel, a larger set example of such limited treatment is vibration. A var- of environmental factors is alway• present. The particu- iety of texts, journals, and other information sources lar factors in the set vary with time, place, and opera- deal with vibration in all of its many aspects. Only such tional modes. The selection of the factors that describe information on vibration as is deemed of particular a given environment constitutes a definition of the test importance to the military design engineer is included, or operating environment.

Even with this limitation, it is apparent that a number Ir the various chapters of this handbook, the Inter- of omissions have occurred. These result primarily national System of Units (SI) is preferred. Often, how- from efforts to obtain a coherent presentation within ever, available data and practical considerations have the limitations of time and effort. made it necessary to present data in units that are not The nature of the data presented varies considerably part of this system. In some cases, data may be given among the various induced environmental factors.

The in several sets of units in order to relate the less familiar amount of information available on electromagne'ic units to those that have been in common usage. 1-2