For example, :TRIGger:SHOLd:CSrc CHANnel2 /*Set the clock source to CH2*/ :TRIGger:SHOLd:CSrc? /*The query returns CHAN2*/ :TRIGger:SHOLd:SLOPe For example, :TRIGger:SHOLd:SLOPe NEGative /*Set edge type to falling edge*/ :TRIGger:SHOLd:SLOPe? /*The query returns NEG*/ :TRIGger:SHOLd:PATTern For example, :TRIGger:SHOLd:PATTern L /*Set the data type to L*/ :TRIGger:SHOLd:PATTern? /*The query returns L*/ :TRIGger:SHOLd:TYPe 85 / 136 CHANnel3|CHANnel4} Description When the digital channel is used as the trigger source channel, the digital probe must be connected to the oscilloscope.
Return format The query returns D10, D11, D12, D13, D20, D21, D22, D23, D30, D31, D32, D33, D40, D41, D42, D43, CHAN1, CHAN2, CHAN3, CHAN4. Command format :TRIGger:SHOLd:SLOPe :TRIGger:SHOLd:SLOPe? Function description Sets or queries the edge type of the establishment hold trigger. Parameter Name Type Range Default Discrete {POSitive|NEGative} POSitive Description : POSitive: rising edge trigger :NEGative: falling edge trigger Return format The query returns POS or NEG. Command format :TRIGger:SHOLd:PATTern :TRIGger:SHOLd:PATTern? Function description Sets or queries the data type of the establishment hold trigger. Parameter Name Type Range Default Discrete {H|L} H Description H:
High level L: Low level Return format The query returns H or L. Command format :TRIGger:SHOLd:TYPe :TRIGger:SHOLd:TYPe? Function description Sets or queries the hold type of the hold hold trigger. Parameter Name Type Range Default Discrete {SETup|HOLd|} SETup Description SETup: Setup. When the setup time is less than the set value (: TRIGger: SHOLd: STIMe), the oscilloscope triggers. Return format HOLd: Hold. When the hold time is less than the set value (: TRIGger: SHOLd: HTIMe), the oscilloscope triggers.