Math Operation EN source as CH1, CH2, CH3, or CH4. Channels in closed state cannot be selected. 3. Offset: Click on the Offset menu label and set the offset by selecting the multi-functional knob V0 or directly setting the vertical offset for the calculation result display window using the pop-up numeric keyboard. 4. Scale: Click on the Scale menu label, set the gear by selecting the multi-functional knob V0 or directly set the vertical gear for the calculation result display window using the pop-up numeric keyboard. 5. Auto settings:
Click the AutoSetting button, and the instrument will automatically adjust the vertical gear and offset of the calculation results to the optimal value based on the current configuration, for the convenience of users' observation. 6. Unit: Click on the Unit menu tab to select dBm/dBV or Vrms. 7. X frequency range: In X , select the mode to determine the frequency range and set the frequency range. ⚫ Span Center: The frequency range refers to the screen width. Divide the frequency range by 10 to obtain the frequency of each grid. Click on the input box of the center frequency item to set the frequency of the frequency domain waveform corresponding to the horizontal center of the screen.
The minimum value range is 5Hz~5GHz, and the default value is 5MHz. Click on the input box of the frequency range item to set the frequency range of the frequency domain waveform, with a value range of 10Hz~5GHz and a default value of 10MHz. ⚫ Start End: The starting frequency refers to the frequency on the left side of the screen. Click on the input box of the starting frequency item to set the starting frequency of the frequency domain waveform. The value range is from 0Hz to the value of the ending frequency -10Hz, with a default value of 0Hz. The termination frequency refers to the frequency on the right side of the screen.
Click on the input box of the termination frequency item to set the termination frequency of the frequency domain waveform. The value range is the starting frequency value+10Hz~5GHz, and the default value is 10MHz. 8. Peak Search: Click on the Peak Search menu tab to enter the peak search settings menu. ⚫ Peak search: turned on or off ⚫ Peak number: Click on the input box for the Peak Number item and set the peak Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 95