Hantek — DPO7000 UserManual

Math Operation EN 10. Label: Click on the Label menu label and set it to display waveform labels in the calculation result display window. Please refer to the label section. 9.3 Logic Operation Click on the [MATH] menu, and the logical operations include: A&&B (AND), A | | B (OR), A ^ B (XOR), ! A (NOT). ⚫ A&&B: Perform logical AND operations on the waveform of the specified source point by point and display the results. When the voltage value of the source channel is greater than the threshold set by the corresponding channel during operation, it is determined as a logical "1", otherwise it is determined as a logical "0". The logical AND operation of two binary bits. ⚫ A | | B:

Perform logical OR operations on the waveform of the specified source point by point and display the results. When the voltage value of the source channel is greater than the threshold set by the corresponding channel during operation, it is determined as a logical "1", otherwise it is determined as a logical "0". The logical OR operation of two binary bits. ⚫ A ^ B: Perform a logical XOR operation on the waveform of the specified source point by point and display the results. When the voltage value of the source channel is greater than the threshold set by the corresponding channel during operation, it is determined as a logical "1", otherwise it is determined as a logical "0".

The logical XOR operation of two binary bits. ⚫ ! A: Perform logical 'not' operations on the waveform of the specified source point by point and display the results. When the voltage value of the source channel is greater than the threshold set by the corresponding channel during operation, it is determined as a logical "1", otherwise it is determined as a logical "0". The logical 'not' operation of a binary bit. Table 9.2 Logic Operation Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 97 Triangle Better frequency resolution. Measure the narrow band signal and that has strong noise interference. Flattop Measure the signals accurately.

Measure the signal that has no accurate reference and requires an accurate measurement. A B A&&B A||B A^B !A