Hantek — DPO7000 UserManual

Math Operation EN 9.5 Digital Filtering In the Math Operations menu, click on the Operator to select from the drop-down menu. The digital filtering supported by this series of oscilloscopes includes: LowPass, HighPass, BandPass, and BandStop. ⚫ LowPass: Only signals with frequencies lower than the current frequency limit are allowed to pass through. ⚫ HighPass: Only signals with frequencies higher than the current frequency lower limit are allowed to pass through. ⚫ BandPass: Only signals with frequencies higher than the current frequency lower limit and lower than the current frequency upper limit are allowed to pass through. ⚫ BandStop:

Only signals with frequencies lower than the current frequency lower limit or signals higher than the current frequency upper limit are allowed to pass through. 1. Operator: Click on the Operator menu tab and select logical operation. 2. Source A: Click on the menu of Source A to select a reference waveform with source CH1, CH2, CH3, CH4, or Ref. Channels in closed state cannot be selected. 3. Offset: Click on the Offset menu label and set the offset by selecting the multi-functional knob V0 or directly setting the vertical offset for the calculation result display window using DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 102