Measure EN Among them, xi is the measurement result of the i-th point, and n is the number of measured points. 10. Vrms: The root mean square value on the entire waveform or gating region. 11. Per Vrms: The root mean square value within a period. Among them, xi is the measurement result of the i-th point, and n is the number of measured points. 12. Fall Pre shot: The ratio of the difference between the minimum and bottom values of the falling edge of a waveform and its amplitude. 13. Fall Overshoot: The ratio of the difference between the maximum value of the falling edge of the waveform and the top value to its amplitude. 10.2.5 Other parameters Positive Slew Rate:
On the rising edge, first calculate the difference between the high value and the low value, then use the difference to divide the corresponding time value to obtain the positive slew rate. Negative Slew Rate: On the falling edge, first calculate the difference between the low value and the high value, then use the difference to divide the corresponding time value to obtain the negative slew rate. 10.3 Measurement Settings 10.3.1 Add Click the [Meas] button to enter the measurement settings menu. 1. Measurement Category: Click on [Meas] -> Add -> Category to select three measurement categories: Horizontal, Vertical, and Other.
At the same time, the specific measurement parameters in the measurement categories are displayed on the screen, as shown in the following figure. You can also turn the multi-functional knob V0 in the measurement category area to select horizontal, vertical, or other measurement categories, and then press to switch to that measurement category. Horizontal : Freq, Period, RiseT, FallT, PosPW, NegPW, PDuty, NDuty, BWidth, MaxTime, MinTime, +Edges, -Edges, +Pulses, -Pulses, TrigCnt, +slope, -slope. Vertical : VMean, VMax, VMin, PkPk, VTop, VMid, VBase, VAmp, VRms, Vovr, Vper, PVRms, PVMeas, Vfov, Vrpr. Other :
FRR, FFF, FRF, FFR, LRR, LRF, LFR, LFF, +Phase, -Phase, +AreaDC, -AreaDC, perAreaDC, absAreaDC, +AreaAC, -AreaAC, perAreaAC,absAreaAC. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 112