Hantek — DPO7000 UserManual

Measure EN 10.5.2 Track Mode In tracking cursor mode, two cursors (cursor A and cursor B) can be adjusted to measure the X and Y values of two different sources, respectively. When moving the cursor horizontally/vertically, the marker will automatically position on the waveform. When expanding or compressing the waveform horizontally/vertically, the marker will track the point marked during the last adjustment of the cursor. Click the [Cursors] button in the button area to enter the cursor setting menu. The cursor defaults to off mode. Click on the Mode menu tab and select the cursor mode as tracking. In the window where the measurement results are displayed, the window can be moved.

By changing the cursor position, the measurement results also change in real-time. AX: The X value at cursor A. BX: The X value at cursor B. AY: The Y value at cursor A. BY: The Y value at cursor B. BX-AX: Horizontal spacing between cursors A and B. BY-AY: The vertical spacing between cursors A and B. |1/dX |: The reciprocal of the horizontal spacing between cursors A and B. 1. Source: Click on the Source menu label, and the available information sources include CH1~CH4 and Math. 2. AX: Click on the AX menu label to select the horizontal position of cursor A. After selection, rotate the knob V0 to adjust the cursor position. 3. BX:

Click on the BX menu label to select the horizontal position of cursor B. After selection, rotate the knob V0 to adjust the cursor position. 4. AXBX: DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 120