Hantek — DPO7000 UserManual

Reference Waveform EN 11.1 Source Click on the Source menu label and select the reference waveform source CH1~CH4 or D0~D15 from the pop-up menu. 11.2 Clear Click on the Clear menu tab to clear the reference waveform. 11.3 To Adjust the Ref Waveform Display Set the vertical gear and vertical offset of the reference waveform. 1. Vertical Scale: Click on the VScale menu label and set the vertical gear of the reference waveform by rotating the multi-functional knob V0 or the pop-up numeric keyboard. 2. Vertical offset: Click on the VOffset menu tab and set the vertical offset of the reference waveform by rotating the multi-functional knob V0 or the pop-up numeric keyboard.

11.4 Detail Click on the Details menu tab to open the Reference Details window. 11.5 To Reset the Reference Waveform Reference waveform reset refers to: if a gear or offset operation is performed on the reference waveform, the reset operation can restore the waveform to the original saved position. Click on the Reset menu tab to reset the reference waveform. 11.6 Color Setting This series of oscilloscopes provides multiple colors to identify different reference DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 124