Decode EN Click on the Setting menu tab to enter the Settings menu. ⚫ Data: Click on the Data menu tab, and the available data bits are: 5bit, 6bit, 7bit, 8bit, and 9bit. ⚫ Parity: Click on the Parity menu tab, and the available verification methods include: None, Odd, and Event. ➢ None: There is no checksum during transmission. ➢ Odd: The total number of "1" in the data bit and parity bit is odd. For example, if you send 0x55 (01010101), you need to check that the bit stuffing is filled with 1. ➢ Event: The total number of "1" in the data bit and parity bit is even. For example, if 0x55 (01010101) is sent, 0 needs to be filled in the calibration position. ⚫ Stop Bit:
Click on the Stop Bit menu tab, and the available stop bits are: 1 bit, 1.5 bit, and 2 bit. ⚫ Endian: Click on the Endian menu tab, and the available bit orders are: LSB, MSB. ➢ LSB: Least Significant Bit, which means that the low bit of data is transmitted first. ➢ MSB: Most Significant Bit (most significant bit), that is, the high data bits are transmitted first. ⚫ Package: Click on the Package menu tab to select whether to open or close the package. ⚫ Separator: Click on the Separator menu label, and the available package separators are 0A (LF), 0D (CR), 20 (SP), and 0 (NULL). 7. Copy Trig: Click on the Copy Trig menu tab to select the Copy Trigger function.
The copy trigger function can quickly apply trigger settings to corresponding types of decoding functions. 8. Decoding example: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 151