Decode EN 1. Bus Type: Click on the Bus Type menu tab and select I2C from the pop-up menu to configure I2C decoding. 2. Bus Status: Click on the Bus Status menu tab and choose to turn on (ON) or off (OFF) the bus switch function. 3. Source: Click on the Source menu tab to enter the Source Settings menu. ⚫ Set clock channel source and threshold ➢ Click on the SCL menu tab and select the source of the clock channel. ➢ Click on the SCL Thre menu tab and adjust the threshold of the clock channel through XX settings. When changing the threshold of the clock channel, a dashed line appears on the screen displaying the current threshold level.
When the change is stopped, the dashed line of the threshold level disappears after about 2 seconds. ⚫ Set data channel source and threshold ➢ Click on the SDA menu tab and select the source of the data channel. ➢ Click on the SDA Thre menu tab and adjust the threshold of the data channel through XX settings. ⚫ Exchange Click on the Exchange menu tab and select Clock/Data or Data/Clock. Can exchange Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 153