Store and Load EN If the current "Name Input Area" does not contain characters, please skip to the next step; If the current "Name Input Area" contains characters, click the delete button to delete all characters in the name input area in sequence. ➢ Input the first character 'N' Currently in uppercase, please skip to the next small step; If lowercase is currently displayed, select the case switch button to switch the characters to uppercase. If "F" is selected and the knob is pressed, the character will appear in the input area.
➢ Input other characters Refer to the previous step and use the same method to input the remaining characters 'ame' in sequence, paying attention to capitalization during the input process. ➢ Modify or delete inputted characters During the name input process, you can modify or delete the characters that have already been entered. To delete a character that has already been entered, select the delete key and press to delete the character. If you modify a character that has already been entered, delete the character and re-enter the desired character.
If the modified character is in the middle, it needs to be deleted from the last character forward (left) to the character that needs to be modified, and then re-enter the character. ➢ After completing the input, click the completion button, and the oscilloscope will create a specified type of file or directory under the current path with that file name. ⚫ Create a Chinese name File name: ➢ Select Chinese input method DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 180