Analyze EN When the measurement item is selected to accumulate and measure the count of signal edge events, clicking the Clear Count button can reset the measurement result to zero. 17.2 Digital Voltmeter (DVM) The digital voltmeter (DVM) of this series of digital oscilloscopes can measure the voltage of three significant digits on any analog channel. The collection system of DVM measurement and oscilloscope is asynchronous and always performs collection. The voltmeter setting menu can be accessed through the following methods: ⚫ Click the key area [Analyze] -> DVM to enter the DVM setting menu.
⚫ Click the navigation icon [Hantek] in the upper left corner of the screen, select the digital voltmeter, and enter the setting menu. 1. DVM: Click the menu label of DVM , select to turn on or off DVM function, select to turn on DVM, as shown in the figure below, including signal source, channel mode, voltage value, calibration, etc. 2. Source: Click on the Source menu tab, select the desired source, and select the analog channel Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 185