Quick start EN ⚫ Trigger knob: Modify the trigger level or threshold level. Rotate clockwise to increase the level, and counterclockwise to decrease the level. During the modification process, the trigger level moves up and down, while the trigger level/threshold level value in the upper right corner of the screen changes in real-time. Press this knob to quickly set the trigger level value to 50% of the waveform peak value. ⚫ Trig Menu: Press the button to open the trigger operation menu. ⚫ Force Trig: Pressing this key will force the oscilloscope to generate a trigger signal. ⚫ Mode: Press this key to switch the trigger mode to Auto, Normal, or Single. 6. AUTO:
Press this button to enable the automatic waveform setting function. The oscilloscope will automatically adjust the vertical gear, horizontal time base, and triggering method based on the input signal to achieve the optimal waveform display. 7. Run/Stop: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 21