Hantek — DPO7000 UserManual

Quick start EN the screen, as shown in the following figure. Figure 4.15 Numeric Keypad In the numeric keypad, you can use the touch screen function to enter values or units by clicking on them. After entering all numerical values and selecting the desired units, the numeric keypad will automatically close to complete the parameter settings. In addition, after completing the numerical input, you can also directly click the in the numeric keyboard to close it, and the units of the parameters are the default units. In the numeric keypad, you can also perform the following operations: ⚫ Delete the entered parameter values. ⚫ Set the parameters to maximum or minimum values.

⚫ Set the parameters to default values. ⚫ Clear the parameter input box. 3. For parameters on the menu, click the menu label button directly to switch settings. 4.11 To Use the Built-in Help System To Use the Built-in Help System The help system of this oscilloscope provides instructions for various function buttons on the front panel and corresponding menu keys. The operation steps are: ⚫ Click the button in the button area to enter the help module; ⚫ Press other keys to obtain help information; ⚫ Press the button again to exit the help module. For example:

After clicking the [Help] button, click the [QuickAction] button again, and the explanation menu for [QuickAction] will pop up on the screen. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 31