DR-880 7-1. Press the FS-5U connected to CTL1 of the CTL 1,2 jack. fig.exppedalcheck2.eps fig.footswcheck2.eps Advance the EV-5 pedal to the maximum position (away from yourself). fig.exppedalcheck3.eps Release the FS-5U. fig.footswcheck3.eps Slowly return the EV-5 pedal to the minimum position (toward yourself). fig.exppedalcheck4.eps 7-2. Test CTL2 in the same way. (press -> release) fig.footswcheck4.eps The OK result will not appear unless the center position is detected. Verify that all results return OK. 7-3. Test CTL3 in the same way. (press -> release) Press [BANK] to proceed to the next test item. 9. MIDI and USB test fig.footswcheck5.eps MIDI 1.
Use a MIDI cable to create a loop between MIDI OUT and IN. 2. Press [FAVORITE 1]. 7-4. Test CTL4 in the same way. (press -> release) 3. Verify that that MIDI test result is OK. USB fig.footswcheck6.eps 1. Use a USB cable to connect the DR-880 to your computer. 2. Press [FAVORITE 2]. 3. Verify that the USB test result is OK. fig.midiusbcheck1.eps Verify that all Foot Switch tests produce a result of OK. Press [BANK] to proceed to the next test item. 8. Exp Pedal check Press the [BANK] switch to proceed to the next test item. Connect an EV-5 to the CTL3,4 EXP PEDAL jack. Start with the expression pedal lowered (minimum position).
fig.exppedalcheck1.eps Slowly advance the EV-5 pedal (away from yourself). 23