U s e r M a n u a l D r e a m b o x D M 5 0 0 english 3. E x p l a n a t i o n f r o n t p a n e l 3.1 Smartcard Reader Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia. 3.2 Standby LED The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the Dreambox is powered on. 3.3 Remote Control (RC) Led The remote control LED lights up every time the Dreambox receives a signal from the remote control. 3.4 Standby on/off The Standby on/off button toggles between standby mode and powered on mode. 4.
E x p l a n a t i o n r e a r p a n e l 4.1 Antenna input (DM 500-C/T) Connect your antenna cable here. 4.2 Antenna output (DM 500-C/T) You can optionally connect your TV or VCR here. 4.3 LNB input (DM 500-S) Connect the coaxial cable from your LNB here. 4.4 LNB output (DM 500-S) You can connect an analogue/digital receiver here. Remember to shutdown your Dreambox completely in order for the receiver to work. 4.5 Video output (FBAS) You can optionally connect your Dreambox to a TV using a RCA/Chinch cable. (Composite) 4.6 Audio output - analog (Cinch) Connect your Dreambox with a RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX In or Tape In ports). 5