U s e r M a n u a l D r e a m b o x D M 5 0 0 english 4.7 Serial interface (RS232C, Sub-D, 9-pin) The Serial Port is used to update the operating system. Please connect a serial null modem cable here. 4.8 TV Scart Connect your TV or beamer to your Dreambox using a Scart cable. 4.9 Audio output - digital (Toslink) You can connect your Dreambox with an optical (Toslink) cable to your HiFi-Amplifier or DSP. The AC3 signal is also available at this port in case the selected channel transmits Dolby Digital signals. 4.10 Power supply connector Plug the power cable of the power supply that came with your Dreambox into power outlet. Connect your power supply to your Dreambox.
You must not connect the power plug of the power supply to anything other than a socket that supplies 230V/50Hz. 4.11 Network interface (Ethernet 10/100Mbit, RJ45) The Communication Port is an Ethernet port. It is used to communicate with your Dreambox via HTTP, FTP, NFS, Telnet and Samba. This port is also used to update the operating system of your Dreambox. Please use a regular patch cable to connect your Dreambox to your LAN. 6