Useful Features > Setting the Document Protection Feature Related Information & “Cleaning Inside the Scanner” on page 144 & “Straight Lines Appear when Scanning from ADF” on page 172 & “Glass Dirt Alert Does Not Disappear” on page 173 Setting the Document Protection Feature To reduce damage to the document, scanning stops immediately when the following conditions are detected. ❏ A paper feed error has occurred ❏ A document is fed at an angle The default setting is On-Medium . c Important: ❏ This feature does not prevent all documents from being damaged. ❏ Paper feed errors may not be detected depending on the paper feeding conditions. 1. Start Epson Scan 2 Utility.
❏ Windows 10 Click the start button, and then select EPSON - Epson Scan 2 Utility . ❏ Windows 8.1/Windows 8 Enter the software name in the search charm, and then select the icon displayed. ❏ Windows 7/Windows Vista/Windows XP Click the start button, and then select All Programs or Programs - EPSON - Epson Scan 2 - Epson Scan 2 Utility . ❏ Mac OS Select Go - Applications - Epson Software - Epson Scan 2 Utility . 2. Make the following settings on the Scanner Setting tab. Set Paper Protection to On-Low , On-Medium or On-High . To enable this feature, select the level of detection you want to use. See the following table for details on each level.
140 Level Description On-Low Lower the sensitivity to detect the skew of the originals. On-Medium Detect the skew of the stapled originals and the skew that On-Low could not detect.