Maintenance > Cleaning Inside the Scanner > Resetting the Number of Scans After Regular Cleaning 11. Hold down the x button for at least two seconds while opening the scanner cover. The rollers on the bottom move momentarily, and then the scanner enters cleaning mode. The rollers rotate a bit each time you press the x button. Press the x button several times to rotate the rollers. Use a genuine Epson cleaning kit or a soft, moist cloth to clean the rollers as they rotate. Repeat this step until the rollers are clean. ! Caution: Be careful not to get your hands or hair caught in the mechanism when operating the roller. This could cause an injury. 12. Close the scanner cover.
The scanner exits cleaning mode. Related Information & “Cleaning Kit Codes” on page 29 & “Replacing the Roller Assembly Kit” on page 150 Resetting the Number of Scans After Regular Cleaning Reset the number of scans using Epson Scan 2 Utility after regular cleaning. 1. Turn on the scanner. 2. Start Epson Scan 2 Utility. ❏ Windows 10 Click the start button, and then select EPSON > Epson Scan 2 Utility . 148