Solving Problems > Problems Starting Scanning > Cannot Start Scanning from Smart Device ❏ Example of connecting to SSIDs with a different frequency range A privacy separator on the wireless router is available. Solutions Most wireless routers have a privacy separator feature that blocks communication between connected devices. If you cannot communicate between the scanner and the computer or smart device even if they are connected to the same network, disable the privacy separator on the wireless router. See the manual provided with the wireless router for details. The IP address is incorrectly assigned.
Solutions If the IP address assigned to the scanner is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP address may not be assigned correctly. Click Add on the Scanner Settings screen in Epson Scan 2 Utility. Select the model you are using, enter the IP address, and then click OK . Restart the wireless router or reset the network settings for the scanner. There is a problem with the network settings on the smart device. Solutions Try accessing any website from your smart device to make sure that your smart device's network settings are correct. If you cannot access any website, there is a problem on the smart device. Check the network connection of the computer.
See the documentation provided with the smart device for details. The scanner is off. Solutions Make sure the scanner is turned on. Also, wait until the status light stops flashing indicating that the scanner is ready to scan. 168