EPSON — Paper Protection Does not Work Correctly

Solving Problems > Paper Feeding Problems > Paper Protection Does not Work Correctly 4. If you cannot pull originals straight up, carefully pull out any jammed originals from the output tray in the direction of the arrow. c Important: Make sure there is no paper inside the scanner. 5. Close the scanner cover. The Original Jams in the Scanner Frequently If the original jams in the scanner frequently, try the following. ❏ Press the button to slow down the scanning speed. ❏ Clean the rollers inside the scanner. ❏ If the ejected originals get stuck in the output tray, store the output tray and do not use it.

Related Information & “Cleaning Inside the Scanner” on page 144 Paper Protection Does not Work Correctly Depending on the original and the level you set, this feature may not work correctly. ❏ Select Off to disable the feature when scanning plastic cards or thick paper. ❏ When misdetection occurs frequently, lower the level of this feature. ❏ If your original is damaged, check that this feature is enabled. If it is already enabled, increase the level of protection for the feature. 171