Adding or Replacing the Computer or Devices > Disabling the Network Setting from the Control Panel ❏ ipconfig command By comparing the setting information with actual communication, you can check whether the connection is correct. In case there are multiple DHCP servers on the same network, you can find out the actual address assigned to the computer, the referred DNS server, etc. Display the connection status of the network interface that is currently used by the computer. ❏ Format : ipconfig /all ❏ Examples : ❏ pathping command You can confirm the list of routers passing through the destination host and the routing of communication. ❏ Format : pathping xxx.xxx.xxx.xxx ❏ Examples :
pathping 192.0.2.222 Disabling the Network Setting from the Control Panel You can disable the network settings. 184