Administrator Information > Backing Up the Settings Configuring Email Notification Configure email notification by using Web Config. 1. Access Web Config and select the Device Management tab > Email Notification . 2. Set the subject of email notification. Select the contents displayed on the subject from the two pull-down menus. ❏ The selected contents are displayed next to Subject . ❏ The same contents cannot be set on left and right. ❏ When the number of characters in Location exceeds 32 bytes, characters exceeding 32 bytes are omitted. 3. Enter the email address for sending the notification email. Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ?
^ _ { | } ~ @, and enter between 1 and 255 characters. 4. Select the language for the email notifications. 5. Select the check box on the event for which you want to receive a notification. The number of Notification Settings is linked to the destination number of Email Address Settings . Example : If you want to send a notification to the email address set for number 1 in Email Address Settings when the admin password is changed, select the check box for column 1 on the line Administrator password changed . 6. Click OK . Confirm that an email notification will be sent by causing an event. Example : The administrator password has been changed.
Related Information & “Running Web Config on a Web Browser” on page 26 Items for Email Notification Backing Up the Settings You can export the setting value set from Web Config to the file. You can use it for backing up the setting values, replacing the scanner, etc. The exported file cannot be edited because it is exported as a binary file. 194 Items Settings and Explanation Administrator password changed Notice when administrator password has been changed. Scanner error Notice when the scanner error has occurred. Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.