Administrator Information > Advanced Security Settings > Using a Digital Certificate Importing a CA-signed Certificate Import the obtained CA-signed Certificate to the scanner. c Important: ❏ Make sure that the scanner’s date and time is set correctly. Certificate may be invalid. ❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time. 1. Access Web Config and then select the Network Security tab. Next, select SSL/TLS > Certificate , or IPsec/IP Filtering > Client Certificate or IEEE802.1X > Client Certificate . 2. Click Import A certificate importing page is opened. 3. Enter a value for each item.
Set CA Certificate 1 and CA Certificate 2 when verifying the path of the certificate on the web browser that accesses the scanner. Depending on where you create a CSR and the file format of the certificate, required settings may vary. Enter values to required items according to the following. ❏ A certificate of the PEM/DER format obtained from Web Config ❏ Private Key : Do not configure because the scanner contains a private key. ❏ Password : Do not configure. ❏ CA Certificate 1 / CA Certificate 2 : Optional ❏ A certificate of the PEM/DER format obtained from a computer ❏ Private Key : You need to set. ❏ Password : Do not configure. ❏ CA Certificate 1 / CA Certificate 2 :
Optional ❏ A certificate of the PKCS#12 format obtained from a computer ❏ Private Key : Do not configure. ❏ Password : Optional ❏ CA Certificate 1 / CA Certificate 2 : Do not configure. 4. Click OK . A completion message is displayed. Note: Click Confirm to verify the certificate information. Related Information & “Running Web Config on a Web Browser” on page 26 202