Administrator Information > Advanced Security Settings > Using a Digital Certificate 3. Enter Common Name . You can enter up to 5 IPv4 addresses, IPv6 addresses, host names, FQDNs between 1 to 128 characters and separating them with commas. The first parameter is stored to the common name, and the others are stored to the alias field for the subject of the certificate. Example: Scanner's IP address : 192.0.2.123, Scanner name : EPSONA1B2C3 Common name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123 4. Specify a validity period for the certificate. 5. Click Next . A confirmation message is displayed. 6. Click OK . The scanner is updated. Note:
You can check the certificate information from Network Security tab > SSL/TLS > Certificate > Self-signed Certificate and click Confirm . Related Information & “Running Web Config on a Web Browser” on page 26 Configuring a CA Certificate When you set the CA Certificate, you can validate the path to the CA certificate of the server that the scanner accesses. This can prevent impersonation. You can obtain the CA Certificate from the Certification Authority where the CA-signed Certificate is issued. Importing a CA Certificate Import the CA Certificate to the scanner. 1. Access Web Config and then select the Network Security tab > CA Certificate . 2. Click Import . 3.
Specify the CA Certificate you want to import. 4. Click OK . When importing is complete, you are returned to the CA Certificate screen, and the imported CA Certificate is displayed. Related Information & “Running Web Config on a Web Browser” on page 26 204