Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network Configuring a Certificate for IPsec/IP Filtering Configure the Client Certificate for IPsec/IP Filtering. When you set it, you can use the certificate as an authentication method for IPsec/IP Filtering. If you want to configure the certification authority, go to CA Certificate . 1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Client Certificate . 2. Import the certificate in Client Certificate . If you have already imported a certificate published by a Certification Authority, you can copy the certificate and use it in IPsec/IP Filtering.
To copy, select the certificate from Copy From , and then click Copy . Related Information & “Running Web Config on a Web Browser” on page 26 Connecting the Scanner to an IEEE802.1X Network Configuring an IEEE802.1X Network When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN switch with authentication function, or an access point. 1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic . 2. Enter a value for each item. If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID. 3. Click Next . A confirmation message is displayed. 4. Click OK . The scanner is updated.
IEEE802.1X Network Setting Items 217 Items Settings and Explanation IEEE802.1X (Wi-Fi) The connection status of IEEE802.1X (Wi-Fi) is displayed. Connection Method The connection method of a current network is displayed.