Scanner Basics > Buttons and Lights on the Control Panel > Lights Additional functions are available with different combinations of buttons. Related Information & “Placing Plastic Cards” on page 44 & “Placing Laminated Cards” on page 47 & “Placing Envelopes” on page 59 & “Cleaning Inside the Scanner” on page 144 Lights 22 F Stop button ❏ Cancels scanning. ❏ Finishes Automatic Feeding Mode. ❏ Cancels Wi-Fi settings by push button setup (WPS). ❏ Press this to release the error when a network connection error occurs. ❏ Cancels a frimware update over a network connection. G Start button ❏ Starts scanning. ❏ Press this when cleaning the inside of the scanner.
+ Hold down the and buttons for more than three seconds to start PIN Code Setup (WPS). See the chapter “Network Settings” for more details. + Turn on the scanner while holding down the button to restore the default network settings. A AP mode light Indicates that the scanner is connected wirelessly in AP mode. B Wi-Fi light Blue indicates that the scanner is connected to a wireless (Wi-Fi) network. White indicates it is searching for an access point. C Error light An error has occurred. See “Light Error Indicators” for more details.