Chapter 5 Installation 5.2.3 Environmental Temperature in the Control Cabinet Requirements The ambient temperature of the motion controller inside the control cabinet is 0~55°C and the humidity is 5 ~ 95%. Please avoid making the installation near the high-temperature equipment. Keep enough space for air ventilation. The fan or air conditioner must be installed if the environment temperature exceeds 55 °C. The motion controller is for indoor use only. The control cabinet which is 1.0m~2.0m in height is easier for installation and operation. Keep the installation away from the high-voltage equipment and power equipment.
The power supply in the control cabinet must be cut off before installation. 5 5.2.4 Actions for Anti-interference Do not install the controller in the control cabinet which contains high-voltage equipment. Please keep at least 200mm far away from the power wire for the installation. There should be a grounding wire for the control cabinet. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. 5-9