Delta DVP-ES2 — 3.4 Interrupt Pointers

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Program example: Ladder diagram: Instruction Operation: code: Allowable range for interruption EI Enable interruption LD X1 Load NO contact X1 OUT Y1 Drive Y1 coil : Pointer of interruption program DI Disable interruption : FEND Main program ends Interruption subroutine LD X2 Load NO contact X2 OUT Y2 Drive Y2 coil IRET Interruption return : External interrupt: ES2 supports 8 external input interrupts: (I000/I001, X0), (I100/I101, X1), (I200/I201, X2), (I300/I301, X3), (I400/I401, X4), (I500/I501, X5), (I600/I601, X6) and (I700/I701, X7). (01, rising-edge trigger , 00, falling-edge trigger ) Timer Interrupts:

ES2 supports 3 timer interrupts: I602~I699, I702~I799, (Timer resolution: 1ms), I805/I899, 1 point (Timer resolution=0.1 ms), available for SE/ES2-E, for other series, firmware version should be V2.00 or later. Communication Interrupts: ES2 supports 3 communication interrupts: I140, I150 and I160. Counter Interrupts: ES2 supports 8 high-speed counter interrupts: I010, I020, I030, I040, I050, I060, I070 and I080. 3-14 f on 01 EI I001 Interruption pointer