Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 11 Operands: S 1 : Lower bound of zone comparison S 2 : Upper bound of zone comparison S : Comparison value D : Comparison result Explanations: 1. S is compared with its lower bound S 1 and upper bound S 2 . D stores the comparison results. 2. The comparison values are signed binary values. If b15=1 in 16-bit instruction or b31=1 in 32-bit instruction, the comparison will regard the value as a negative binary value. 3. Operand S 1 should be smaller than operand S 2. When S 1 > S 2 , the instruction takes S 1 as the 1 st comparison value and performs normal comparison similar to CMP instruction. 4.

If operand S 1 , S 2 , and S use index register F, only 16-bit instruction is available. 5. Operand D occupies 3 continuous devices. D , D +1, D +2 hold the comparison results, D = ON if S 1 > S , D +1 = ON if S 1 ≦ S ≦ S 2 , D +2 = ON if S 2 S Program example: 1. If D is set as M0, then M0, M1, M2 will work as the program example below. 2. When X0 = ON, ZCP instruction is driven and one of M0, M1, M2 is ON. When X0 = OFF, ZCP instruction is not driven and M0, M1, M2 remain in the previous status. X0 X0 3. Use RST or ZRST instruction to reset the comparison result.

3-60 Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers D ZCP P Zone Compare ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F ZCP, ZCPP: 9 steps DZCP, DZCPP: 17 steps S 1 * * * * * * * * * * * S 2 * * * * * * * * * * * S * * * * * * * * * * * D * * * PULSE 16-bit 32-bit SA2 SX2 SS2 SA2 SA2 SX2 ES2/EX2 SS2 ES2/EX2 SX2 ES2/EX2 SS2 SE SE SE ZCP K10 K100 C10 M0 X0 RST M0 RST M1 RST M2 RST M0 RST M2 X0 ZRST M0 M2 RST M1