DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S 1 : Summand S 2 : Addend D : Sum Explanations: 1. This instruction adds S 1 and S 2 in BIN format and store the result in D . 2. The most significant bit (MSB) is the sign bit of the data. 0 indicates positive and 1 indicates negative. All calculations is algebraically processed, e.g. 3 + (-9) = -6. 3. If S 1 , S 2 and D use device F, only 16-bit instruction is applicable. 4. Flags: M1020 (Zero flag), M1021 (Borrow flag), M1022 (Carry flag) Program Example 1: When X0 = ON, the content in D0 will plus the content in D10 and the sum will be stored in D20. In 16-bit BIN addition: X0 D20 Program Example 2:
In 32-bit BIN addition: When X0 = ON, the content in (D31, D30) will plus the content in (D41, D40) and the sum will be stored in (D51, D50). D30, D40 and D50 are low word; D31, D41 and D51 are high word X0 D50 (D31, D30) + (D41, D40) = (D51, D50) Operation of flags: 16-bit instruction: 1. If the operation result is “0”, the zero flag M1020 will be ON. 2. If the operation result exceeds -32,768, the borrow flag M1021 will be ON. 3. If the operation result exceeds 32,767, the carry flag M1022 will be ON. 32-bit instruction: 1. If the operation result is “0”, the zero flag, M1020 will be ON.
3-74 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 20 D ADD P Addition ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices X Y M S Word devices Program Steps Y M S K H KnX KnY KnM KnS T C D E F ADD, ADDP: 7 steps DADD, DADDP: 13 steps S 1 * * * * * * * * * * * S 2 * * * * * * * * * * * D * * * * * * * * PULSE 16-bit 32-bit SA2 SE SX2 SS2 SA2 SA2 SX2 ES2/EX2 SS2 ES2/EX2 SX2 ES2/EX2 SS2 SE SE 0 ADD D0 D10 DADD D30 D40