Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set D : Device to store the operation result of 2’s Compliment Operands: Explanations: 1. This instruction conducts operation of 2’s complement and can be used for converting a negative BIN value into an absolute value. 2. This instruction is generally used in pulse execution mode (NEGP, DNEGP). 3. If operand D uses index F, only a 16-bit instruction is available. Program Example 1: When X0 goes from OFF to ON, the phase of each bit in D10 will be reversed (0 → 1, 1 → 0) and then 1 will be added to the Least Significant Bit (LSB) of the register. Operation result will then be stored in D10. X0 Program Example 2: To obtain the absolute value of a negative value: 1.

When MSB (b15) of D0 is “1”, M0 = ON. (D0 is a negative value). 2. When M0 = ON, the absolute value of D0 can be obtained by NEG instruction. Program Example 3: Obtain the absolute value of the remainder of the subtraction. When X0 = ON, a) If D0 > D2, M0 = ON. b) If D0 = D2, M1 = ON. c) If D0 d) D4 is then able to remain positive. 3-89 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 29 D NEG P 2’s Complement (Negation) SA2 ES2/EX2 SS2 SE SX2 Type OP Bit Devices X Y M S Word devices Program Steps Y M S K H KnX KnY KnM KnS T C D E F NEG, NEGP: 3 steps DNEG, DNEGP:

5 steps D * * * * * * * * PULSE 16-bit 32-bit ES2/EX2 SA2 SX2 SS2 SA2 SA2 SX2 SS2 ES2/EX2 SX2 ES2/EX2 SS2 SE SE SE NEGP D10 M1 BON D0 M0 K15 M NEGP D0