Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set Operands: S : Start No. of source device D : Start No. of destination device n 1 : Length of data to be shifted n 2 : Number of devices to be shifted as a group Explanations: 1. This instruction performs a right shift from source device of n 2 registers starting from S to 2. This instruction is generally used in pulse execution mode (WSFRP). destination device of n 1 registers starting from D . 3. The type of devices designated by S and D has to be the same, e.g. K n X, K n Y, K n M, and K n S as a category and T, C, and D as another category 4. Provided the devices designated by S and D belong to K n type, the number of digits of K n in S and D has to be the same. 5.

Valid range of operand n1 , n2 : 1≤ n2 ≤ n1 ≤512 Program Example 1: 1. When X0 is triggered, WSFRP instruction shifts D10~D13 into data stack D20~D35 and D20~D35 also shift to the right with a group of 4 registers. 2. The figure below illustrates the right shift of the registers in one scan.

 D23~D20 → Carry  D27~D24 → D23~D20  D31~D28 → D27~D24  D35~D32 → D31~D28  D13 ~D10 → D35~D32 completed X0 5 4 registers in one group shift to the right Carry 1 2 3 4 3-97 API Mnemonic Operands Function Controllers SA2 36 WSFR P Word Shift Right ES2/EX2 SS2 SX2 SE Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers WSFR P Word Shift Right ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F WSFR, WSFRP:

9 steps S * * * * * * * D * * * * * * n 1 * * n 2 * * PULSE 16-bit 32-bit ES2/EX2 SA2 SX2 SS2 SA2 ES2/EX2 SS2 SA2 SE SX2 SS2 ES2/EX2 SX2 SE SE WSFRP D10 D20 K16 K4 D13 D12 D11 D10 D35 D34 D33 D32 D31 D30 D29 D28 D27 D26 D25 D24 D23 D22 D21 D20