3. Instruction Set Operands: S : Head address of data stack D : Destination device n : Length of data stack Explanation: 1. This instruction defines the data stack of n words starting from S as a FIFO data stack and specifies the first device as the pointer ( S ). The content of pointer indicates current length of the stack. When SFRDP is executed, first data ( S+1 ) will be read out to D , all data in this stack moves up to fill the read device and content in pointer minuses 1. When the content in pointer = 0, the instruction stops and carry flag M1022= ON 2. This instruction is generally used in pulse execution mode (SFRDP). Program Example: 3. Valid range of operand n : 2≤ n ≤512 1.
When X0 goes from OFF to ON, D9~D2 are all shifted to the right and the pointer D0 is decremented by 1 when the content of D1 is read and moved to D21. 2. The figure below illustrates the shift and reading of the instruction. The content of D1 is read and moved to D21. D9~D2 are all shifted to the right. The content of D0 is decremented by 1. X0 Data read 3-101 API Mnemonic Operands Function Shift Register Read Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 39 SFRD P ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F SFRD, SFRDP:
7 steps S * * * * * * D * * * * * * * * n * * PULSE 16-bit 32-bit SA2 SX2 SS2 SA2 ES2/EX2 SS2 SA2 SE SX2 ES2/EX2 SS2 ES2/EX2 SX2 SE SE SFRDP D0 D21 K10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 D21 Pointer D9 D8 D7 D6 D5 D4 D3 D2 D1 D21