Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S : Source device to be decoded D : Device for storing the result n : Number of consecutive bits of S Explanation: 1. The instruction decodes the lower “ n ” bits of S and stores the result of “2 n ” bits in D . 2. This instruction is generally used in pulse execution mode (DECOP). 3. When operand D is a bit device, n = 1~8, when operand D is a word device, n = 1~4 Program Example 1: 1. When D is used as a bit device, n = 1 ~ 8. Errors will occur if n = 0 or n > 8. 2. If n = 8, the decoded data is 2 8 = 256 bits data. 3. When X20 goes from OFF to ON, the data of X0~X2 will be decoded to M100~M107. 4.

If the source data is 3, M103 (third bit from M100) = ON. 5. After the execution is completed, X20 is turned OFF. The decoded results or outputs will retain their operation. X20 X2 X1 X0 4 1 2 3 7 6 5 4 2 1 0 3 M107 M106 M105 M104 M103 M102 M101 M100 3-104 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 41 DECO P Decode ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DECO, DECOP: 7 steps S * * * * * * * * * * * D * * * * * * * * n * * PULSE 16-bit 32-bit SA2 SS2 SA2 ES2/EX2 SS2 SA2 SE SX2 ES2/EX2 SS2 SX2 ES2/EX2 SX2 SE SE DECOP X0 M100 K3 0 1 1 0 0 0 0 1 0 0 0