Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S : Source device to be encoded D : Device for storing the result n : Number of consecutive bits of S Explanation: 1. The instruction encodes the lower “2 n ” bits of source S and stores the result in D . 2. They highest active bit in S has the priority for encoding operation. 3. This instruction is generally used in pulse execution mode (ENCOP). 4. When operand S is a bit device, n =1~8, when operand S is a word device, n =1~4 5. If no bits in S is active (1), M1067, M1068 = ON and D1067 records the error code 0E1A (hex). 1. When S is used as a bit device, n = 1 ~ 8. Errors will occur if n = 0 or n > 8.

Program Example 1: 2. f n = 8, the decoded data is 2 8 = 256 bits data. 3. When X0 goes from OFF to ON, the data in (M0 to M7) will be encoded and stored in lower 3 bits of D0 (b2 to b0). The unused bits in D0 (b15 to b3) will be set to 0. 4. After the execution is completed, X0 is turned OFF and the data in D remains unchanged. K3 X0 M7 M6 M5 M4 M3 M2 M1 M0 b15 b0 D0 3-106 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 42 ENCO P Encode ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DECO, DECOP:

7 steps S * * * * * * * * * D * * * * * n * * PULSE 16-bit 32-bit SA2 SX2 SS2 SA2 ES2/EX2 SS2 SA2 SE SX2 ES2/EX2 SS2 ES2/EX2 SX2 SE SE ENCOP M0 D0 0 0 0 0 1 0 0 0 7 6 5 4 3 2 1 0 all be 0 4 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1