DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 4. M10~ M13 = ON when the current value of C10 falls between lower and upper bounds. 5. If the lower bound value is bigger than upper bound value, when C10 140, M12 = ON.
M10 40 100 120 210 M11 60 140 M12 M13 150 390 400 200 0 3-168 Lower-bound value Upper- bound value Current value of C10 Output D100= 40 D101 = 100 40≦C10≦100 M10 = ON D102 = 120 D103 = 210 120≦C10≦210 M11 = ON D104 = 140 D105 = 170 140≦C10≦170 M12 = ON D106 = 150 D107 = 390 150≦C10≦390 M13 = ON Lower- bound value Upper- bound value Current value of C10 Output D100 = 40 D101 = 100 40≦C10≦100 M10 = ON D102 = 120 D103 = 210 120≦C10≦210 M11 = ON D104 = 140 D105 = 60 60≦C10≦140 M12 = OFF D106 = 150 D107 = 390 150≦C10≦390 M13 = ON