Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set 65 Operands: S : No. of timer (T0~T183) m : Set value in timer ( m = 1~32,767, unit: 100ms) D : Start No. of output devices (occupies 4 consecutive devices) Explanations: 1. STMR instruction is specifically used for delay-OFF, ON/OFF triggered timer and flashing circuit. 2. The timer number ( S ) specified by STMR instruction can be used only once Program Example: 1. When X20 = ON, STMR sets T0 as the 5 sec special timer. 2. Y0 is the delay-OFF contact. When X20 is triggered, Y0 = ON; When X20 is OFF, Y0 = OFF after a 5 sec delay. 3. When X20 goes from ON to OFF, Y1 = ON for 5 seconds. 4. When X20 goes from OFF to ON, Y2 = ON for 5 seconds. 5.

When X20 goes from OFF to ON, Y3 = ON after a 5 second delay. When X20 turns from ON to OFF, Y3 = OFF after a 5 second delay. X20 X20 Y0 5 sec 5 sec Y1 5 sec 5 sec Y2 5 sec Y3 3-173 Mnemonic Operands Function Controllers STMR Special Timer ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F STMR: 7 steps S * m * * D * * * 16-bit 32-bit SA2 SA2 SA2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE STMR T0 K50 Y0 5 sec