DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Note: When the value in S+0 is less than 2, it means there is no data to be read/moved and no action will be taken. When the value in S+0 is bigger than n+1, it means the data is full and no action will be taken. “No action will be taken” means no error will be displayed nor the index value (S+0) will have any change. Example: 1. If M0 switches OFF ON, execute the instruction DTM will copy the values stored in D101 to D0. 2. As the image shown below, execute the instruciton DTM to copy the value K12 stored in D101 to D0 and put K0 to D105. 3. Execute the instruciton DTM for 5 times to have the results:
D0=K16 and values in D101~105 are K0. 3-190