DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Inquiry message: Response message: RTU mode START/END: RTU Timeout Timer: 00 H: Broadcasting to all drives (Broadcast) Address: 01 H: toward the drive at address 01 0F H: toward the drive at address 15 10 H: toward the drive at address 16 and so on, max. address: 254 (‘FE’) 3-240 ‘2’ LRC Checksum ‘D’ ‘7’ END CR LF 2103H ‘0’ ‘0’ ‘0’ ‘7’ LRC Checksum ‘1’ CR END LF Field Name Descriptions START Refer to the following explanation Address Communication address: n 8-bit binary Function Function code: n 8-bit binary DATA (n-1) Data: n × 8-bit data ……. DATA 0 CRC CHK Low CRC checksum:
16-bit CRC consists of 2 8-bit binary data CRC CHK High END Refer to the following explanation Baud rate(bps) RTU timeout timer (ms) Baud rate (bps) RTU timeout timer (ms) 300 40 9,600 2 600 21 19,200 1 1,200 10 38,400 1 2,400 5 57,600 1 4,800 3 115,200 1