Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S 1 : Augend S 2 : Addend D : Addition result Explanations: 1. S 1  S 2  D . The floating point value in S 1 and S 2 are added and the result is stored in D . 2. If the source operand S 1 or S 2 is specified as constant K or H, the constant will automatically be converted to binary floating point value for the addition operation. 3. S 1 and S 2 can designate the same register. In this case, if the instruction is specified as “continuous execution instruction” (generally DEADDP instruction) and the drive contact is ON, 4. Flags:

M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag) the register will be added once in every scan. If absolute value of the result exceeds max. floating point value, carry flag M1022 = ON. If absolute value of the result is less than min. floating point value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON. Program Example 1: When X0 = ON, add the binary floating point value (D1, D0) with binary floating point value (D3, D2) and store the result in (D11, D10). X0 Program Example 2: When X2 = ON, add the binary floating point value of (D11, D10) with K1234 (automatically converted to binary floating point value) and store the result in (D21, D20).

X2 3-328 API Mnemonic Operands Function Controllers 120 D EADD P Floating point addition ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DEADD, DEADDP: 13 steps S 1 * * * S 2 * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE DEADD D0 D2 D10 DEADD D10 K1234 D20