3. Instruction Set Operands: S : Source device (binary floating value) D : Operation result Explanations: 1. ACOS instruction performs arc cosine operation on S and stores the result in D 2. ACOS value = COS -1 3. See the figure below for the relation between the input S and the result: R S 4. If operation result in D is 0, Zero flag M1020 = ON. 5. The decimal value of the COS value designated by S should be within -1.0 ~ +1.0. If the value exceeds the range, M1067 and M1068 will be ON and instruction will be disabled. Program Example:
When X0 = ON, DACOS instruction performs arc cosine operation on the binary floating value in (D1, D0) and stores the ACOS value in (D11, D10) in binary floating format. X0 3-347 API Mnemonic Operands Function Controllers 134 D ACOS P Arc Cosine ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DACOS, DACOSP: 9 steps S * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE S: Input (COS value) R: Result (ACOS val 0 1,0 2 -1,0 DACOS D0 D10