Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S : Device for byte swap. Explanations: 1. For 16-bit instruction, high byte and low byte of the register will be swapped. 2. For 32-bit instruction, byte swap is conducted on the 2 registers separately. 3. This instruction adopts pulse execution instructions (SWAPP, DSWAPP) 4. If operand D uses device F, only 16-bit instruction is available Program Example 1: When X0 = ON, high byte and low byte of D0 will be swapped. D0 SWAPP X0 D0 High Byte Low Byte Program Example 2: When X0 = ON, high byte and low byte of D11 will be swapped as well as the high byte and low byte of D10.

D10 DSWAP X0 D11 D 0 1 High Byte Low Byte 3-360 API Mnemonic Operands Function Controllers 147 D SWAP P Byte swap ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F SWAP, SWAPP: 3 steps DSWAP, DSWAPP: 5 steps S * * * * * * * * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE High Byte Low Byte