3. Instruction Set When X0 = ON, MODRW instruction executes the function specified by Function Code 03 RTU mode (COM3: M1320 = ON COM1: M1139 = ON): PLC VFD-B, PLC sends: ” 01 03 2100 0006 CF F4 ” VFD-B PLC, PLC receives: “ 01 03 0C 0000 0503 0BB8 0BB8 0000 012D 8E C5 ” Registers for received data (responding messages) Program example 5: COM2(RS-485), Function Code H05 1. Function code K5(H05): Force ON/OFF bit device 2. PLC1 connects to PLC2: (M1143 = OFF, ASCII mode), (M1143 = ON, RTU Mode) 3. n = 1 indicates Force ON (set FF00H) and n = 0 indicates Force OFF (set 0000H) 4.
For ASCII or RTU mode, PLC COM2 stores the data to be sent in D1256~D1295 and stores the received data in D1070~D1085 5. Take the connection between PLC1 (PLC COM2) and PLC2 (PLC COM1) for example, the tables below explain the status when PLC1 Force ON PLC2 Y0. 3-375 Register Data Descriptions D1 1766 H PLC converts ASCII codes in 2101 H and stores the converted data automatically. D2 0000 H PLC converts ASCII codes in 2102 H and stores the converted data automatically. D3 0000 H PLC converts ASCII codes in 2103 H and stores the converted data automatically. D4 0136 H PLC converts ASCII codes in 2104 H and stores the converted data automatically.
D5 0000 H PLC converts ASCII codes in 2105 H and stores the converted data automatically. Register Data Descriptions D0 0000 H PLC converts data in 2100 H and stores the converted data automatically. D1 0503 H PLC converts data in 2101 H and stores the converted data automatically. D2 0BB8 H PLC converts data in 2102 H and stores the converted data automatically. D3 0BB8 H PLC converts data in 2103 H and stores the converted data automatically. D4 0136 H PLC converts data in 2104 H and stores the converted data automatically. D5 012D H PLC converts data in 2105 H and stores the converted data automatically.