Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Function Explanations: Pulse output diagram: Freq. t2 Pulse number Time g1 g2 g3 S 2 1. Definitions: t1  target frequency of 1 st shift t3  target frequency of 3 rd shift t2  target frequency of 2 nd shift g1  ramp-up time of 1 st shift g2  ramp-up time of 2 nd shift g3  ramp-down time of 3 rd shift S 2  total output pulses 2. Explanations on each shift:  1 st shift: Assume t1 = 6kHz, gap freqency = 1kHz, gap time = 10ms Ramp-up steps of 1 st shift: Freq. 1kHz Time 3-480 t1=6kHz 10ms 10ms 10ms 10ms 10ms z 0Hz 10ms 10ms 10ms 10ms 10ms