Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 205 Operands: S 1 : Source device 1 S 2 : Source device 2 n : Data length ( n = 1~16) D : Destination device Explanations: 1. S 1 and S 2 can be T/C/D devices, for C devices only 16-bit devices are applicable (C0~C199). 2. The value in the high 16 bits of n used in the 32-bit instruction is an invalid value. 3. The value in the low 8 bits of n indicates the data length. For the 16-bit instruction, n is between 1 and 16. For the 32-bit instruction, n is between 1 and 32. If n is less than 1, it is count as 1. If n is larger than the maximum value, it is count as the maximum value. 4. The 16-bit data is written into D .

If the data length is less than 16 bits, the bit which does not have a corresponding value is 0. For example, if n is K8, bit0~7 have corresponding values, and 5. The 32-bit instruction supports DVP-ES2/EX2 version 3.0 and above, DVP-SS2 version 2.8 and bit8~15 are 0. above, DVP-SA2 version 2.6 and above, DVP-SX2 version 2.4 and above, and DVP-SE. 6. The value in the high 8 bits of n indicates the comparison condition. The relation between the comparison conditions and the values are shown in the following table. 7. The example of setting n : If n used in the 16-bit instruction is H0108, eight pieces of data are compared with eight pieces of data in terms of “larger than”.

If n used in the 32-bit instruction is H00000320, 32 pieces of data are compared with 32 pieces of data in terms of “less than”. 8. If the setting value of the comparison condition exceeds the range, or the firmware version does not support the comparison condition, the default comparion condition “equal to” is executed. DVP-ES2/EX2 version 3.0and above, DVP-SS2 version 2.8 and above, DVP-SA2 version 2.6 and above, DVP-SX2 version 2.4 and above, and DVP-SE support the setting of the comparison condition. 3-492 Mnemonic Operands Function Controllers D CMPT P Compare table ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F CMPT:

9 steps CMPTP: 9 steps DCMPT: 17 steps DCMPTP: 17 steps S 1 * * * S 2 * * * n * * * D * * * * * * PULSE 16-bit 32-bit ES2 / SS2 2 SA2/ ES2/ SA2/ ES2/ SA2/ SX2 SS2 SX2 SS2 SX2 EX SE EX2 SE EX2 SE Value K0 K1 K2 K3 K4 Comparison S 1 = S 2 S 1 S 1 S 1 > S 2 S 1 >= S 2 condition