3. Instruction Set 302~ 307 Operands: S 1 : Source device 1 S 2 : Source device 2 S 3 : Source device 3 Explanations: 1. DVP-ES2/EX2 series PLCs whose version is 3.20/DVP-SS2 series PLCs whose version is 3.00/DVP-SA2 series PLCs whose version is 2.60/DVP-SE series PLCs whose version is 1.20/DVP-SX2 series PLCs whose version is 2.40 (or above) are supported. 2. The absolute value of the difference between S 1 and S 2 is compared with the absolute value of S 3 . Take AND= for example. If the comparison result is that the absolute value of the difference between S 1 and S 2 is equal to the absolute value of S 3 , the condition of the instruction is met.
If to the absolute value of S 3 , the condition of the instruction is not met. the comparison result is that the absolute value of the difference between S 1 and S 2 is not equal 3. The instruction ANDZ ※ is connected to a contact in series. 4. If the values of the most significant bits in S 1 , S 2 , and S 3 are 1, the values in S 1 , S 2 , and S 3 are negative values. 5. A 32-bit counter (C200~) must be used with the 32-bit instruction DANDZ ※ . If it is used with the 16-bit instruction ANDZ ※ , a program error will occur, and the ERROR LED indicator on the PLC will blink.
3-525 Mnemonic Operands Function Controllers ES2/EX2 SS2 SA2 SX2 SE D ANDZ※ Comparing contact type absolute values ANDZ※ Controllers ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F ANDZ※: 7 steps DANDZ※: 13 steps S 1 * * * * * * * * * S 2 * * * * * * * * * S 3 * * * * * * * * * PULSE 16-bit 32-bit ES2/ EX2 SS2 SA2/ SE SX2 ES2/ SA2 / SX2 ES2/ SA2/ SS2 SS2 SX2 EX2 SE EX2 SE 16-bit 32-bit Comparison result API No.
instruction instruction On Off 302 ANDZ> DANDZ> | S 1 - S 2 | > | S 3 | | S 1 - S 2 | ≦ | S 3 | 303 ANDZ>= DANDZ>= | S 1 - S 2 | ≧ | S 3 | | S 1 - S 2 | < | S 3 | 304 ANDZ< DANDZ< | S 1 - S 2 | < | S 3 | | S 1 - S 2 | ≧ | S 3 | 305 ANDZ<= DANDZ<= | S 1 - S 2 | ≦ | S 3 | | S 1 - S 2 | > | S 3 | 306 ANDZ= DANDZ= | S 1 - S 2 | = | S 3 | | S 1 - S 2 | ≠ | S 3 | 307 ANDZ<> DANDZ<> | S 1 - S 2 | ≠ | S 3 | | S 1 - S 2 | = | S 3 |