Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set PLC program design: Step 1) SET M1620  2.0A protocol Step 2) RST M1621 and SET M1622  Slave mode; receiving data from all slaves, if the set ID is met, it responds to master. In receiving mode, the timeout function is not available. Step 3) LDP M0  set up MsgId (0x012) and the responses Step 4) LD M0  use CANRS instruction to set the first left-side module COPM-SL to respond 3-589