DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming exception response will return to the master device. In the exception response, the most significant bit of the original command code is set to 1, and an exception code explaining the condition that caused the exception is returned. An example of exception response of command code 01H and exception 02H: Sent message: Feedback message: 4-6 Field Name ASCII Hex STX : 3A Slave Address 01 30 31 Command code 01 30 31 Starting Address Hi 04 30 34 Starting Address Lo 00 30 30 Number of Points Hi 00 30 30 Number of Points Lo 10 31 30 Error Check (LRC) EA 45 41 END CR LF 0D 0A Field Name ASCII Hex STX :
3A Slave Address 01 30 31 Function 81 38 31 Exception Code 02 30 32 Error Check (LRC) 7C 37 43 END CR LF 0D 0A Exception Explanation: code: 01 Illegal command code: The command code received in the command message is invalid for PLC. 02 Illegal device address: The device address received in the command message is invalid for PLC. 03 Illegal device content: The data received in the command message is invalid for PLC. 07 1. Checksum Error - Check if the checksum is correct 2. Illegal command messages - The command message is too short. - Length command message is out of range.