Delta DVP-ES2 — B.2.1 Station Addresses of Ethernet Modules

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming B.1 Specifications for an Ethernet PLC/Module The specifications for a DVP series Ethernet port and the functions of a DVP series Ethernet port are listed below. Specifications for an Ethernet interface: Ethernet functions:

B.2 Ethernet Control Registers B.2.1 Station Addresses of Ethernet Modules card (Applicable to a DVP-EH3 series MPU) FEN01 communication K108 B-2 Item Specifications Interface RJ-45 with Auto MDI/MDIX Number of ports 1 Port Transmission method IEEE802.3, IEEE802.3u Transmission cable Category 5e Transmission rate 10/100 Mbps Auto-Defect Protocol ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, MODBUS TCP Function DVP12SE ES2-E & DVP26SE DVPEN01-SL DVP-FEN01 (Function card for a DVP-EH3 series PLC) MODBUS / TCP Supporting mode Server & Client Server & Client Server & Client Server & Client Number of servers connected 16 16 16 4 Number of clients connected 8 8 16 4 EtherNet/IP Supporting mode Adapter Adapter - - Number of CIP connections 4 8 - - Number of TCP connections 4 4 - - Number of I/O connections - 8 - - Number of connections for data mapping 8 8 24 8 RTU mapping 4 4 4 - E-mail - - 4 - SNMP - - 2 - IP filter 4 4 8 4 Model name Ethernet port in DVP-SE / ES2-E Series DVPEN01-SL FROM/TO station K108 Please refer to Example 1.

address